Fire Alarm Control Panels

Analog

FireNET™ Plus 1127 – ANALOG ADDRESSABLE FIRE ALARM CONTROL PANEL

FireNET™ Plus 1127

DESCRIPTION

The FireNET™ Plus 1127 series control panel is an analog addressable fire alarm panel with build options containing 1 or 2 SLC loops, a Digital Alarm Communicator/ Transmitter (DACT), and an RS-485 bus for network communication. Each SLC loop supports 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points per loop. Communication between devices is accomplished by use of standard cable (shielded or twisted pair is not required). Each panel includes a 4-amp power supply and has 2 onboard NAC circuits. The RS-485 bus provides communication to the panel network while another RS-485 bus provides communication for peripheral devices. The RS-232 interface allows the convenience of programming via a PC. The system will support a variety of Hochiki devices; photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity modes. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zonemonitoring module. The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic tools. An Auto Learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service which makes this an exceptional product both in performance and value.

STANDARD FEATURES

• Analog design using Hochiki’s advanced DCP protocol for fast communication
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
• Uses standard wire, no-shielded or twisted pair required on SLC loops
• Integrated digital alarm communicator (DACT) with Contact ID and SIA reporting formats
• Programmable sensitivity levels by device
• Alarm Verification feature
• Automatic daily calibration & drift compensation routine
• Large 8-line x 40-character LCD display (320 char.)
• 1 or 2 loop (option)
• RS-485 bus for panel network (option)
• Built-in RS-232 interface for programming via a PC
• 3 on board programmable Form C relays rated at 1 amp at 30VDC
• 2 auxiliary power outputs, each rated 360mA at 24 VDC
• Loop Explorer Windows® configuration utility
• Auto-learn feature
• 500 network wide software zones
• Network Capability of up to 64 panels (option)
• Built in help and alarm information screens
• 2 on-board Class B (style Y) NAC circuits rated at 2.3 amps each (Special Application) and 1.6 amps each (Regulated continuous)
• Gentex, System Sensor, Wheelock, and Amseco NAC sync protocol built-in
• Automatic day/night sensitivity modes
• Fire Drill test function
• Walk Test function
• Powerful & versatile Cause & Effect wizard including:
*Cause & Effect action
*Disable function configuration
*Test mode configuration


 FireNET ™ 4127 – ANALOG ADDRESSABLE FIRE ALARM CONTROL PANEL

FireNET™ 4127

DESCRIPTION

The FireNET™ 4127 control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points. Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the RS-232 interface allows the convenience of programming via a PC. The system will support a variety of Hochiki devices: photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone-monitoring module. The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic tools. An Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service makes this an exceptional product both in performance and value.

STANDARD FEATURES

• UL 864 9th edition Listed
• Analog design using Hochiki’s advanced DCP protocol for fast and robust communication
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
• Uses standard wire, no shielded or twisted pair required on SLC loops
• Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
• 4 on board Class B (style Y) NAC circuits rated at 2.5 Amps each
• Programmable sensitivity levels per device & automatic day/night sensitivity modes
• Automatic daily calibration & drift compensation routine
• Large 8-line x 40-character LCD display (320 char.)
• 2 or 4 loop versions (800 addresses/sub-addr. max.)
• Dual RS-485 bus for panel network
• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface
• 5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
• 500mA of auxiliary power available rated at 24 VDC
• Loop Explorer Windows® configuration utility
• 500 network wide software zones
• Network Capability of up to 64 panels
• RS485 slave bus for expansion – up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 17 FN-4127-IO boards
• Auto-learn feature
• Built in help and alarm information screens
• Fire Drill test function
• Walk Test function
• Alarm Verification feature
• FireNET is UL listed for Central Station Service, Remote Station Service and Proprietary Service
• Operates on 120VAC or 240VAC input voltage
• Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including:
*Cause & Effect action
*Disable function configuration
*Test mode configuration


FireNET™ 4127 – ANALOG ADDRESSABLE FIRE ALARM CONTROL PANEL WITH PLEXIGLASS WINDOW

FireNET™ 4127

DESCRIPTION

This alternate build of the FireNET™ 4127 control panel is equipped with a Plexiglass window to meet the requirements of major cities including the City of Denver. Access level 2 is enabled as soon as the outer door of the enclosure is opened (CAT 30 Key). The FireNET™ 4127 control panel is an analog addressable fire alarm panel containing 2 or 4 SLC loops with each loop supporting 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points. Communication between devices is transferred through standard cable (shielded or twisted pair is not required). Each panel includes a 5.25 amp power supply and has 4 on board NAC circuits. An RS-485 bus provides communication to the panel network, while the RS-232 interface allows the convenience of programming via a PC. The system will support a variety of Hochiki devices: photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity mode. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone-monitoring module. The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic tools. An
Auto-learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service makes this an exceptional product both in performance and value.

STANDARD FEATURES

• UL 864 9th edition Listed
• Analog design using Hochiki’s advanced DCP protocol for fast and robust communication
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
• Uses standard wire, no shielded or twisted pair required on SLC loops
• Supports Class B (style 4) and Class A (style 6 or 7) SLC loops
• 4 on board Class B (style Y) NAC circuits rated at 2.5 Amps each
• Programmable sensitivity levels per device & automatic day/ night sensitivity modes
• Automatic daily calibration & drift compensation routine
• Large 8-line x 40-character LCD display (320 char.)
• 2 or 4 loop versions (800 addresses/sub-addr. max.)
• Dual RS-485 bus for panel network
• 2 built-in RS-232 interfaces for programming via a PC and serial printer interface
• 5 on board programmable Form C relays rated at 1 amp at 30VDC (Fire1, Fire2, trouble, supervisory, aux.)
• 500mA of auxiliary power available rated at 24 VDC
• Loop Explorer Windows® configuration utility
• 500 network wide software zones
• Network Capability of up to 64 panels
• RS485 slave bus for expansion – up to 32 FN-4127-IO boards or up to 15 FN-LCD-S serial annunciators and up to 17 FN-4127-IO boards
• Auto-learn feature
• Built in help and alarm information screens
• Fire Drill test function
• Walk Test function
• Alarm Verification feature
• FireNET is UL listed for Central Station Service, Remote Station Service and Proprietary Service
• Operates on 120VAC or 240VAC input voltage
• Powerful & versatile Cause & Effect programming (up to 500 maximum, network wide) including:
*Cause & Effect action
*Disable function configuration
*Test mode configuration

Conventional

HCP-1008E FIRE ALARM CONTROL PANEL

HCP-1008E

Description

Hochiki’s HCP-1008E Fire Alarm Control Panel is a microprocessor based unit designed for maximum flexibility and easy installation. Fully configurable from the front panel using the push buttons and DIP switches, it enables the user to configure the system to meet their specific requirements.

The HCP-1008E consists of one HMCC-1024-6 main Chassis in an HBB-1024 Enclosure. The HMCC1024-6 main Chassis comes complete with 8 Class B (Style B) initiating circuits which may be configured as 4 Class A (Style D) circuits. It can be expanded up to 24 Class B or 12 Class A circuits with the addition of two HDM-1008 Initiating Circuit Modules. In addition it comes equipped with 4 Class A/B (Style Z/Y) indicating circuits which are each rated at 1.7 Amps. The main Chassis also includes a 6 amp power supply which powers the system and supplies two 4-wire resettable regulated smoke power supply of 24 VDC 200mA maximum each. The HMCC- 1024-6 also allows for the addition of two HSGM-1004 Signal Modules or two HRM-1008 Relay Modules in place of the HDM-1008 Initiating Circuit Adder Modules. (Maximum of 2 adder modules and 1 communication module).

The cabinet is available in a beige color for the Canadian market and a red exterior for the U.S. and international markets. A Fire Retardant Lexan Window in the hinged door allows for viewing of the status LEDs. It comes with a durable CAT-30 lock and key. Space is provided for up to 17 AH Gel Cell batteries. Hochiki’s HCP-1008E is designed as an economical Microprocessor Based Fire Alarm Control Panel which is expandable up to 24 display points. Its modular design suits various applications. Ideal for applications such as small institutional and commercial buildings, shopping malls, offices and public establishments, the HCP-1008E is configurable to meet virtually all requirements. The panel is designed to be easy in its installation, operation and maintenance. This makes the system cost effective and very reliable for its intended applications.

STANDARD FEATURES

• 8 Class B (Style B) initiating circuits which may be configured as 4 Class A (Style D) circuits
• Expandable up to 24 Class B or 12 Class A initiating circuits
• 4 Class A/B (Style Z/Y) indicating circuits with individual trouble indicators (1.7 Amps max. per circuit)
• Each indicating circuit can be configured as silenceable or non-silenceable. Audibles may be configured as Steady, Temporal Code, California Code or March Time
• Each initiating circuit can be configured as alarm, supervisory, waterflow or trouble
• Two outputs for 4 wire resettable smoke power supply (200 mA Max. each)
• Alarm verification on initiating circuits
• Easy configuration via push buttons and DIP switches on the front panel